Description
Supplied is a genuine SDG rear wheel and tyre, typically fitted to high end pit bikes only. The SDG wheels feature 15mm bearings & come ready to fit straight onto your bike. A great upgrade for bikes which come with poor quality wheels.
These wheel’s are designed for enduro use and green laning, not screaming high table tops and pounding whoops!
Fits – CRF70 & CRF110 sized bikes
Tube type – Tube type
Rear tyre size – 90/100-14
Load rating – 55L – 6PR
Rim diameter – 14″
Rim width – 1.6 / 2.0
Placement on vehicle – Rear
Approval rating – Off-road use only
Terrain usage – Dirt
Wheel bearing type – 6202RS
Please note the clearance will be very close on the rear if your bike is fitted with an alloy swing arm as they are slightly shorter. It may be necessary to slide the wheel to the furthest point back and to add 1 link to your chain to allow the tyre to clear the shock mount.
The wheel is supplied & fitted with an innertube and an off-road only use tyre.
If you require E approved road legal tyres, please see our other listing.
Will not fit – any smaller framed pit bike, eg CRF50 framed bikes.
Advice: Ensure all spokes have been tightened upon installation and carry out regular checks. Consider using thread locking compound where appropriate.
Pit bikes currently fitted with mag wheels may require new sized spacers, We also sell spacers for these wheels if required.
Spacers can be found in the ‘Wheels and tyres’ category with our store.
Reviews
There are no reviews yet.